Symbols; Parts Of The Device/Scope Of Delivery; Safety Instructions - Festool CT-VA-20 Traduccion Del Manual De Instrucciones Originale

Contents
1 Symbols..................................................... 13
2 Parts of the device/scope of delivery........13
3 Safety instructions.................................... 13
4 Intended use..............................................14
5 Technical data........................................... 14
6 Set-up/start-up......................................... 14
7 Working with the pre-separator............... 14
8 Transportation...........................................15
9 Maintenance and cleaning........................ 15
10 Accessories............................................... 16
11 Environment.............................................. 16
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and

safety instructions.

Wear breathing protection.
Tip, advice
Handling instruction
Do not dispose of with domestic waste.
Do not extract glowing dust or other
ignition sources. Do not use in con­
junction with machines that gener­
ate sparks!
Warning! Hazardous dust!
Antistatic with Festool mobile dust
extractors
2 Parts of the device/scope of
delivery
[1-1] Bottom section of CT-VA module
[1-2] Top section of CT-VA module
[1-3] Electrical outlet module with 1.10 m ex­
tension cable
[1-4] Container with lid
[1-5] 0.75 m connecting hose
3 Safety instructions
WARNING!Read and observe all informa­
tion and safety instructions.Failure to ob­
serve the information and safety instructions
may lead to electric shocks, fires and/or seri­
ous injuries.
Keep all safety information and instructions
for future reference.
- Observe all safety instructions and other
instructions in the operating manual for the
mobile dust extractor you are using.
- Warning! Device may contain hazardous
dust. Only have the device maintained and
emptied, and only have the filter replaced
by authorised specialists using suitable
protective equipment.
Risk of explosion and fire: Do not extract:
-
- Sparks or hot dust;
- Combustible or explosive materials (e.g.
magnesium, aluminium, petrol, diluting
agents - with the exception of wood);
- Aggressive materials (e.g. acid, alkaline
solutions, solvents);
- Chemically reactive materials, which
lead to the generation of heat, acids/
bases, gases, etc. (e.g. reactive two-
component materials, aluminium and
water).
- Observe all national safety regulations as
well as the material manufacturer's speci­
fications.
- Use the antistatic suction hose! This helps
reduce the electric charge.
- Only use the electrical outlet module on the
device for its stated purpose.
- Check the plug and the cable regularly and
should either become damaged, in order to
avoid a hazard, have them replaced by an
authorised after-sales service workshop.
- Use the dust collection bag when extracting
dust class M and L dust.
- Ensure there is adequate ventilation.
- Observe all national safety regulations and
ensure the load is secured when transport­
ing it in a vehicle.
- Wood dust mixtures can be flammable and
explosive. Never leave wood dust unatten­
ded in a building or vehicle.
- Dispose of waste at a fire-proof waste dis­
posal site. Observe the national regulations
for waste disposal.
English
13