Operating Procedures - Hu-Friedy Symmetry IQ Manual Del Usuario

OPERATING PROCEDURES

TIP CONNECTION
Your Hu-Friedy Symmetry piezo tip comes with its own tip carrier/torque limiting
wrench (the Guardian, Fig. 3).
Attach tip to handpiece using the Guardian wrench by aligning the threaded
end of the tip to the handpiece. (Fig. 4) Rotate the Guardian wrench clockwise.
Complete installation of the tip by rotating the Guardian until you hear clicking.
The Guardian must be used to completely tighten the tip during installation.
Incomplete tightening may cause the tip to become loose or lack vibration.
When using the Guardian without a tip previously inserted into the tip carrier,
take the following step: place the Guardian over the tip by slipping tip through the
small hole in the bottom, closed end of the tool. This will position the tip within
the Guardian wrench for safety and convenience.
5