Beddit SOLVING SLEEP Manual Del Usuario página 5

1. Download the Beddit app for
your iPhone from the App Store.
The app will guide you
through the following steps
to complete the setup of your
Beddit Sleep Monitor and
is needed to collect sleep
measurements.
The app will be offered only in the
English language.
2. Place the sensor under the
sheets with the dark, rubber side
facing down.
It will be easier to place your
sensor if you remove the bedding
from your sleeping area. If you
have a mattress pad or protector,
place the sensor on top of it so
that there is nothing between the
sensor and your bedsheet.
3. Position the sensor at chest
level so that your pillows will
not cover it.
The sensor should be centered
around your sleeping area. If you
sleep with someone, position the
sensor on your side of the bed.
A portion of the cable will rest on
top of the mattress. Keep the end
of the sensor away from the edge
of the bed.
1 person
4. Plug the USB cable and its
provided power adapter into a
wall socket and cover the sensor
with a fitted sheet.
To avoid tripping, route the cable
to the side and behind the bed.
Make sure that the cable is not
bent awkwardly or strained.
5. Use the Beddit app to connect
to your sensor using Bluetooth.
If you aren't sure which device to
select, you can find the ID number
of your Beddit Sleep Monitor on
the cable close to the sensor.
Additional resources and services
For troubleshooting and frequently
asked questions, browse our Help
Center at beddit.com/faq.
2 people
5