Rear Panel Description - Phonic FIREFLY 808 UNIVERSAL Manual Del Usuario

12. Synchronization Indicators
Firefly 808 Universal can be synchronized with any WCLK sync
device, enabling you to use it for your audio/video recording
studios as well as cinema and video production that requires
high resolution audio. When the Firefly 808 is synchronized,
one of these LEDs will light up to indicate which device the
Firefly is currently synced with. If you try to sync with a device
not connected to the Firefly, the corresponding light will flash
briefly and return back to the previous setting.
12
13. Sampling Rate Indicator
When Firefly 808 is synchronized, one of these LEDs will
light up to show the sampling rate of the device the Firefly is
synchronized with. The Firefly will automatically be set to that
rate.
1
14. AES/SPDIF LED Indicator
These input and output LEDs will light up when the AES/EBU or
S/PDIF interface is in use.
15. ADAT LED Indicator
You can use your optical devices in conjunction with the Firefly
808. When the ADAT optical connection is in use, the input
and output LEDs will activate to let you know the connection is
successful.
16. MIDI Indicator
When using the MIDI interface, these input and output LEDs will
light up.
14 15
FIREFLY 808 UNIVERSAL

Rear Panel Description

17.
These input jacks allow users to connect line-level devices, the
signal of which is fed through the FireWire interface, and sent
directly out the channel 1 and 2 sends.
18.
These outputs act as direct sends of the channel 1 and 2 inputs,
allowing the signal to be used in other devices.
19.
Each of these channels features a balanced ¼" TRS Line
Inputs and can be used to connect any line level device like CD
players, DAT recorders. You can even connect an analog mixer
that does not have FireWire interface to allow you to send that
signal to the computer. Also present are -pin XLR mic input
connectors for use with condenser or dynamic microphones.
20.
These ¼" TRS outputs will allow users to send the main stereo
mix of the Firefly 808's return signal to external devices. The
signals from analog channels 1, , 5 and 7 are sent through the
left output, whereas the 2, 4, 6 and 8 signals are sent through
the right output. When the FireWire or USB interface is in use,
users are able to use the Mixer software's crossfader to select
the degree of the FireWire return signal and the analog input
signal that is sent to these outputs. The Main outputs can be
connected to active speakers, studio monitors, or other mixers,
depending on your needs.
16
Line Input Channel 1 and 2
Channel 1 and 2 Sends
Input Channels 3 to 8
Main Outputs
20
19
17
18