Warning
This heater has a voltage rating of 220-240 volts. The cord has a
plug. An adapter as shown in C is available for connecting
three-blade grounding-type plugs to two-slot receptacles. The
grounding plug extending from the adapter must be connected to
a permanent ground such as a properly grounded outlet box. The
adapter should not be used if a three-slot grounded receptacle is
available.
DO NOT DEFEAT THE SAFETY PURPOSE OF THE
GROUNDED PLUG.
Assembling Process To Wall
Accessories
Ref. Name
1
Explosive bolt M6*50
2
M6 spanner
3
'L' hexagonal wrench(4mm)
4
Remote control
Installation to Wall
When fixing the heater to a wall, ensure hinges are in the
underside so that the lid hands down in the open position.
Minimum required distances:
a) 50cm from the side wall
b) 50cm from the ceiling
c) Installation height above 180cm
MAINTENANCE
Qty
Unplug the unit and let it cool completely.
4
To keep this unit clean, the outer shell may be cleaned with a
1
soft, damp cloth. You may use a mild detergent if necessary.
1
After cleaning, dry the unit with a soft cloth.
1
DO NOT use alcohol, gasoline, abrasive powders, furniture
polish, or rough brushers to clean the heater. This may cause
damage or deterioration to the surface of the heater.
Although this heater is outdoor approved, DO NOT immerse
the heater in water for your safety.
Wait until the unit is completely dry before use.