cecotec Ready Warm 9870 Crystal Towel Manual De Instrucciones página 23

2. Tuesday
3. Wednesday
4. Thursday
5. Friday
6. Saturday
7. Sunday
2. Change the set hour by pressing and holding the
it when the desired time is displayed.
3. Change the set minute by pressing and holding the
pressing it when the desired time is displayed.
Setting the weekly program
Select the mode to set the weekly program. The device will operate the set days at the
set time.
1. Press the
2. Select the days of the week on which the heating program is to be activated by pressing
the button. You can choose between a single day, all days, or a combination of days
set at the factory. The days of the week on which the heating program is activated are
marked with the indicator for active weekdays (4). The following combinations can be set.
(1), (2), (3), (4), (5), (6), (1, 3, 5), (2, 4, 6), (6, 1). (1, 2, 3), (4, 5, 6), (1, 2, 3, 4, 5, 6, 7), (1, 2, 3, 4, s),
(1, 2, 3, 4, 5, 6), (7).
3. Press buttons
You can choose from various factory-set combinations of hours (from 0-24 hours).
4. Each hour indicator is split into 2 light indicators, one indicating if heating has been set at
that hour and the other one indicating it has not been set.
Note: You can select the hours 10 seconds after activating the
to see the hours, briefly exit
immediately afterwards by pressing the
Note: El programa semanal únicamente se activará si el producto está en modo
Automatic mode/Thermostat
Set para activar el termostato. mode to activate the thermostat. The device will be activated
and deactivated automatically in order to maintain the preset temperature. Press the
button to enter the
button to enter
and pto select the hours of the day you want the device to work.
mode by pressing the
mode, the indicator will light up.
button for 5 seconds. Stop pressing
mode ( mode indicator lights up).
again.
READY WARM CRYSTAL TOWEL 9870/9880/9890
ENGLISH
button for 5 seconds. Stop
mode. If you then want
key. Return to mode
.
23