Beper 40.994 Manual De Instrucciones página 10

1.Insert the charger into the shaver.
2.Connect the plug to the socket.
3. the charge indicator lights up.
4. After complete charge, unplug the charger from the socket and the shaver.
INSTRUCTION FOR USE
Shaving
1. Press on/off to start the shaver.
2. Make the shaver head part move quickly on the skin in straight lines and circles.
3.After shaving store the shaver into the fabric cover to prevent from damages.
4.The shaver can run for 10 days after complete charge.
Trimming
Use for trimming temple, mustache push the slide face upwards to open the hair trimmer which can
be started as the shaver start.
Cleaning and care
To ensure a better shaving effect the shaver must be cleaned regularly.
The easier and most sanitary way to clean the shaver is to wash it each time after using it.
Do be careful when using hot water.
Check water temperature to prevent from burns.
1. Stop the shaver.
2. Pull away the 4 shaver heads on the side one by one and then rotate and pull out the middle head
in the arrow direction indicated on it.
3. Clean the 4 shaver heads and trimmer for some minutes with hot running water.
Make sure the inside of both the shaver head part and trimmer has been cleaned thoroughly.
4.Wash the appliance surface.
5.Close the shaver head parts and throw off surplus water.
Do not wipe the shaver head part with a towel or paper tissue that may cause damages to the sha­
ver.
Open the shaver head part again and remain so to dry up the appliance.
13