Care And Maintenance; Warranty Disclaimer; Technical Data - Hama MagCharge Car FC15 Instrucciones De Uso

• Connect the enclosed USB-C to USB-C connecting cable to the USB-C input (A1) on the wireless charger
and the enclosed car adapter for the power supply (A5).
• When the power supply is active, the status LED (A2) lights up blue.
Note
The maximum charging power of up to 15W is only achieved with a Power Delivery (20W) car adapter
(5V/3A, 9V/2.22A, 12V/1.67A) which is included in the extent of delivery.
Warning
• Only use suitable charging devices or USB connections to charge the product.
• Do not use defective chargers or USB ports and do not attempt to repair them.
• Place the back of your Apple smartphone on the wireless car charger. It attaches automatically thanks to
the integrated magnets. (Figure C)
• The charging process begins as soon as an effective induction eld has been established. The status LED
(A3) lights up blue. The current charge status is displayed on your device.
• The charging process ends automatically once your device's battery is fully charged. The function LED
(A3) goes out.
• If metallic or magnetic objects are on the charger, this is indicated by the function LED (A3) ashing blue.
Note - car battery
With some vehicles, it can happen that power continues to be supplied even though the ignition has been
switched off. You should therefore disconnect the product from the line connection when not in use to
protect your car battery from being drained.

5. Care and maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents. Ensure
that no water is able to enter the product.
Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

6. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper
installation/mounting, improper use of the product or from failure to observe the operating instructions and/
or safety notes.

7. Technical data

Wireless car charger
Output (under optimised conditions)
8
Input
5V 3.0 A
9V 2.22 A
12V 1.67 A
max. 15 W