Maintenance And Cleaning - EFBE-SCHOTT TO 5000 Manual De Instrucciones

Fax +32 2 359 95 50

Empty the appliance frequently of breadcrumbs. Make sure the appliance is always

unplugged before emptying it. Check the « Maintenance and Cleaning » section.
When cleaning the appliance, do not use metallic scourers in order to avoid any future risk

of electric short-circuit.
Your appliance must never be switched on through an external timer or any kind of

separate remote control system.
Competent qualified service: after-sales department of the producer or importer or any
(*)
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In case of need you should return the appliance to this service.
CAUTION: the bread carriage handle will not stay down if the appliance is not plugged in!
BEFORE USING THE TOASTER FOR THE FIRST TIME
In order to eliminate any manufacturing residues, operate the toaster a couple of times without
bread with the browning control selector on a medium power level. Some smoke might
escape.
OPERATION
 Before using your appliance for the first time, check if it is clean (see "Maintenance and
cleaning") as it comes into direct contact with bread. Check if any object has fallen into
the slots.
 In the first time, connect the appliance only to a mains earthed wall socket.
 Place the bread slices in the slots (for French bread, cut a loaf shorter than the slots, then
cut it in two pieces along its length). Your appliance is provided to receive French bread,
but also pieces of toast or other bread slices if their thickness and their length are shorter
than the one of the slots. Make sure not to force when inserting the bread in order not to
block it in the slots.
 Press down the bread carriage handle until it stops. Then release the pressure and the
handle will stay in the lower position, which means that the heating process has begun. If
the handle comes up immediately, check if the appliance is plugged in as the handle
blocks only when the unit is plugged in.
 You can adjust the browning intensity to obtain a more or less toasted bread by
positioning the browning control selector to one of the degrees marked from 1 to 6.
Therefore you only have to turn clockwise to increase the intensity, and anticlockwise to
decrease it. The higher the number is, the more toasted the bread will be.
 During the functioning, if you think that the bread is toasted enough or for another reason,
you can break the heating process simply by pressing the cancel button.
 Always unplug the appliance after use and let it cool down before handling or storing it.
RACK FOR BUN WARMING
Your appliance is provided with a rack for bun warming. To install the rack, insert its feet in the
openings foreseen to that purpose inside the slot of the appliance. To store the rack, proceed
inversely.
CAUTION: before using the rack for bun warming, fold out its feet as indicated on picture „B".

MAINTENANCE AND CLEANING

 Before attempting any cleaning operation, make sure the toaster is unplugged from the
supply socket and fully cooled down.
 To remove bread crumbs, slide the crumb tray situated on the side of the appliance.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
9
Assembly page 9/35
TO 5000 - 151117