Idiomas disponibles
Idiomas disponibles
EN
Operating instructions
Headphone setup:
Plug the GX-H3's 3.5mm headphone plug into
your computer's headphone jack. Your audio
will play through the GX-H3 headset. If you do
not hear audio through the headset, check your
computer's audio settings to make sure device
playback settings are correct. Also, try adjusting
volume/mute controls on the headset
and computer.
Microphone setup:
Plug the GX-H3's 3.5mm microphone
plug into your computer's microphone
jack. Check your sound settings to ensure
the GX-H3 is set as the default input
device. Position the microphone near the
user's mouth. If recordings are too quiet,
adjust your microphone volume and
microphone boost in the levels tab of
your microphone settings.
Volume adjustment:
The wheel located on the in-line controller can be
used to adjust volume.
Microphone control:
Move the slider on the in-line controller to the X
position to mute the microphone.
8
