Cleaning The Burner - Fishbone Offroad FB-02E Instrucciones De Uso

3. Place pot on the pot holders and start
cooking.
4. Adjust power as necessary by moving the
control pin (9). Move left to reduce power
and right to increase power.
Extinguishing the stove
1. Adjust power to minimum.
2. Blow out the flames to extinguish.
3. Allow to cool for 5 minutes.
4. Cover the burner (7) with the sealing
cap (5).
Storage
Some fuel may remain inside the stove. Store
the stove upright and with the sealing cap on
to prevent it from leaking out. Empty the fuel
tank before transporting the stove.
Store the fuel safely according to local
regulations and manufacturer's instructions.

Cleaning the burner

Extensive use and burning impure fuel may
cause carbon deposits to form on the burner
(7). If the flame is abnormal during
operation, check that the burner is clean and
the holes on the flame pipes and the center
tube (8) are open. If the holes are blocked,
clean them using the supplied cleaning tool.
If the power control on the center tube (8)
does not move easily, apply a small amount
of spray lubricant such as WD-40 to the
spring at the top of the center tube. Do not
turn the power control with force as that may
damage the burner.
5