Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
Step 4 (optional): Adjustable Latch for Bottom Handle
3
1. If a 2-3/4" (70 mm) backset is required, pull the spindle cam all the way to the right edge of the
adjustment hole.
2. Make sure the 2-3/4" (70 mm) cam hole is properly aligned.
3. Your latch is now set for a 2-3/4" (70 mm) backset. To reset the latch to a 2-3/8" (60 mm)
backset, push the spindle cam to the left end of the adjustment hole.
Latch face plate
• Determine which latch-mounting method will be used and make necessary adjustments.
• No adjustment is required for the square latch face plate.
Changing latch faces
1. Use a flat screwdriver to separate the face plate.
2. Snap the selected face plate onto the back plate.
8
Latch
2
1
Correct
Wrong
Tabla de contenido
