HR-S/GT / HR-C/GT / HR-L/GT
4-
Set the hook onto the truss.
Colocar el garfio en el truss.
5-
Join the cabinet+HRXX bar with the hook adaptor.
a) Firstly, put the front safety screw TORX M4x25.
b) Use the bar holes to tilt the cabinet as per your desired inclination.
c) Put the locking screw DIN7380 M8.
d) Finally, block the knob "C".
Unir el conjunto caja+barra HR-XX al garfio adaptador.
a) Primeramente, colocar de nuevo el tornillo frontal de seguridad TORX
M4x25.
11
Oct 2017
Amate Audio
