URBANGLIDE Quad 4.0 Manual Del Usuario página 6

Handlebar assembly
Align the handlebars vertically
1.
and horizontally with the clip (A &
B). Screw the 4 screws (C) on the
fixed part (D).
Note: The gap between the A & B parts must be the same on both sides of the handlebar.
Inflating tires
Transportation and the time between manufacture and first use may have slightly deflated the tires.
Use a pressure pump to inflate your tires. It is not recommended to use a station inflator, which is
thought to inflate totally different wheels.
•
Inflating
Remove the cap on the wheel, inflate the tire, and replace the cap.
ASSEMBLY
2. Tighten the screws with the 5mm
hex wrench (E), hold with the
10mm wrench (F).
PSI : 30 Max
Bar : 2.07 Max
CAUTION: Regularly check the tire pressure, it
ensures your comfort and safety with each use.
Check that the handlebar is
3.
securely attached by pressing
on it. He should not move.
6