Getting Started - Asus ROG Gladius II Manual Del Usuario

Getting started

To set up your ROG Gladius II Gaming Mouse:
1. Connect the USB cable to your computer's USB port.
2. Connect the micro USB cable to your ROG Gladius II Gaming Mouse.
NOTE: Ensure the ROG logo on the micro USB cable faces up when connecting it to the ROG
Gladius II Gaming mouse.
3. Download the driver from http://www.asus.com then install it in your computer.
Replacing the switches
NOTE: Refer to www.asus.com for the list of compatible switches.
If you want to replace the switches, follow the steps below:
1. Remove the four (4) rubber covers under your mouse, then remove the four (4) screws and
set them aside.
2. Remove the top cover.
3. Replace the switches.
IMPORTANT!
• Ensure to install the switch with its button facing the front of the mouse to the switch socket.
• Ensure that the switches are seated properly on the switch sockets.
4. Replace the cover and secure with the screws.
5. Replace the rubber covers on the bottom of your mouse.
4
Mouse switches
Switch socket
Quick Start Guide
Switch socket