Commissioning And Service; Commissioning; Service - Garantia SUPRA 202559 Instrucciones De Instalación Y Mantenimiento

5.1

Commissioning

Before putting the system into use the filter sieve
surface is to be thoroughly cleaned with asolvent based
cleaning fluid. Alternatively the filter sieve may be
cleaned in a dish washer (40° - max. 60°). Any dirt that
gets into the filter housing during the assembly must be
thoroughly removed.
The filter sieve functions only in one flow direction due
to the designed structure, the direction is marked on the
metal ring with an arrow on the inlet side. When
installing the filter cartridge pay attention that the joint
seam of the sieve surface is positioned upward.
5.2

Service

The complete system is to be inspected at least every 3
months for leakage, cleanliness stability. To ensure the
expected water yield is delivered, it is important to
inspect and to clean the filter sieve at regular intervals.
When carrying out a regular service of the integrated
filter it is also required that the overflow siphon is
checked and cleaned.
[email protected]
www.garantia.eu
5.

Commissioning and Service

11 / 24
Inflow side
Sealingring
Arrowdesignation
under the seal
Lip
Overflow side
Sealingring