Leds; Lan Port Leds; Figure 5: Lan Port Leds; Table 2: Lan Port Led Descriptions - Allied Telesyn AT-iMG606BD Guia De Instalacion

LEDs

LAN Port
LEDs
LED
Link/Activity
Duplex
The AT-iMG606BD Multiservice Gateway has two LEDs for
each LAN port and three LEDs for the unit as a whole.
Each LAN port has two LEDs as shown in Figure 5.
Link/Activity
Table 2 describes the LAN port LEDs.
Table 2. LAN Port LED Descriptions
State
Off The port has not established a link with an end
node.
Blinking The port is transmitting or receiving data.
On A valid link has been established on the port.
Off The port is operating in half-duplex mode.
On The port is operating in full-duplex mode.
AT-iMG606BD Multiservice Gateway Installation Guide
LAN 1 LAN 2
Duplex
Figure 5. LAN Port LEDs
Description
LA
381
23