VOLTOMAT HEATING QH-104263.4 Manual De Instrucciones página 81

QH-104263.4 / QH-104263.5
PARTS DESCRIPTION
1. Wall mount
2. Grille
3. Cord switch
4. Indicator
5. Quartz tubes
MOUNTING
1. Loosen and remove the screws on the top and bottom of the wall mount. Take out the wall mount cover
from the top of the heater. (See Fig. 1 & 2)
2. The quartz heater must be installed at a horizontal position only. Do not install at the ceiling or
vertically. During installation respect the minimum distances indicated in Fig. 3. The heater must be
mounted at least 1800mm above the floor, 300mm under the ceiling and 500mm away from side
wall(s).
Fig.1
Fig.2
- 80 -
GB