Intelligent network solutions 561808 Manual De Instrucciones página 3

Instructions
Rear Panel
This switch is equipped with a power connector and a grounding connector. Use
the included power cord to connect the device to an AC outlet. Wire the grounding
terminal to an earth-grounding object to prevent power spikes.
Power
If using this switch as a passthrough power source for PoE devices on Ports 1, 2,3 and 4, the PD port (5)
on this switch can receive up to 95 watts of power from a connected PoE injector or PoE switch — less
if the connected PoE device isn't capable of sending that much power on one port. This switch (561808)
will use a few of the incoming watts to power itself. The following table shows how much power is
available to devices at ports 1 through 4 when the PD port or the supplied power adapter is used.
Powered by
Port 5 (PD port) only
Power adapter
Setup
Connect Port 5 to a PoE injector or PoE switch to power as many as four PoE devices. You can use the
external power adapter if you do not have a PoE injector or switch or need the additional power it provides.
= PD (powered device) Power & Data
= PSE (power sourcing equipment) Power & Data
Power Available for PoE Devices Connected to Ports 1–4
65 W (IEEE 802.3bt input); 25 W (IEEE 802.3at input); 10 W (IEEE 802.3af input)
65 W total
PSE
PoE In
PD
English 3