VDS TOUCH Manual Técnico De Instalación página 6

Connections and Technical Settings
To access control card of Hand Motion Detector (TOUCH), You've to take off Plastic
Cover ( Shape 2 )
TOUCH Control Card
Working With Two Or More TOUCH
When you need work with two or more TOUCH in your application, You've to set
JMP3 and JMP4 for not affect Photocell signals each other.
You can see an example for working 3 TOUCH together.
1.Photocell
Transmitter Signal Power Setting
You can use POT 1 for set working distance. If you turn POT 1 to + (right) side,
working distance will be longer. If you turn POT 1 to – (left) side, working distance will
be shorter.
This control card has 1 Trimpot (POT 1), 4 Jumpers
(JMP1,JMP2,JMP3,JMP4),4 Connection Socket and Led
Groups
12/24 V AC/DC Working Voltage
Adjusting the working voltage
12V Power Supply
12V AC/DC
Output Contact Type
You can change state of JMP1 for Contact type ;
NO Contact
2. Photocell
24V Power Supply
24V AC/DC
NC Contact
3. Photocell