Barrette HEAVY-DUTY DROP ROD Manual De Instrucciones página 3

1.
Mount the lower drop rod bracket two inches from
the bottom edge of the gate with the 4 supplied
screws (Fig. 1). Mark pilot holes through screw
holes (a), then drill using 3/32" drill bit (b).
2.
Thread the rod through the upper bracket then
through the installed lower bracket into the receiver
hole (your choice: dug, excavated or drilled) (Fig. 2).
3.
With the tabs in the locked position, attach the top
bracket to the gate so that the drop rod does not
drag when gate is opened or closed.
a)
2"
b)
Open
Receiver
Hole
Closed
Receiver
Hole
Fig. 1
Fig. 2
Fig. 3
3