Insert the plug into the
●
socket.
5 5
35° - 80°C
-
1 0
+
Set the desired time.
●
(1 - 24 hours)
In order to cancel the transaction, press the power button.
●
After completion of the dehydrating process, a signal sounds 5x. Then the
●
35° - 80°C
display shows
-
The unit has been switched off.
●
Open the door and take out the dried material.
●
+
Note: If the temperature is still over 45°, the fan will keep on running. The unit
switches to the standby mode if the temperature drops below 45°C.
Remove the power plug.
●
USING SILICONE MATS OR BAKING PAPER
For foodstuffs which are damp or stick easily (e.g. tomatoes) we recommend that
you use a silicone mat or baking paper. Put the silicone mat or the baking paper
on the tray.
IMPORTANT!
Make sure that the baking paper does not cover the entire space of the tray. It
should be easy for the warm air to circulate.
Put the foodstuffs on the silicone mat or the baking paper. At mid-term of the
dehydrating time, the silicone mat or the baking paper can be removed.
26
Switch the unit on.
●
1 - 24 h
°C
+
-
As long as the display
●
is flashing, you can still
change the displayed
temperature
or hours.
1 - 24 h
°C
.
+
-
1 - 24 h
35° - 80°C
°C
-
+
+
-
5 5
1 - 24 h
35° - 80°C
°C
-
1 0
+
+
-
3 5
1 - 24 h
35° - 80°C
°C
-
0 6
+
+
-
Set the desired tempera-
●
ture. (35 - 80 °C)
5 5
1 - 24 h
35° - 80°C
°C
-
1 0
+
+
-
When the display stops
●
flashing, the dehydra-
ting process will start.