General Instructions; Overview; Precautions For Use - Multimetrix CBF01 Manual De Instrucciones

1. General instructions

1.1 Overview

You have purchased a circuit breaker finder (fuse, circuit breaker, contact
breaker etc.) model CBF01 and we thank you for your custom.
The CBF01 is used to locate the protection and circuit-breaker for a mains
outlet, a lamp or any other equipment or electric circuit powered by the
mains network.
The appliance is composed of an emitter and a receiver. The emitter injects a
signal onto the network, the same signal is then detected by the receiver. The
receiver issues a sound signal and its green LED flashes when the signal is
detected. The sensitivity of the receiver is adjustable in order to refine the exact
location of the circuit breaker or the fuse for the tested circuit.

1.2 Precautions for use

• Respect the environment and storage conditions.
• This instrument is portable and autonomous and has been designed for
use:
- indoors on 230 V CAT II networks
- in a level 2 pollution environment
at an altitude below 2000 m
-
- at a temperature included between 5°C and 40°C and a relative
humidity < 80 %.
• If the receiver LED lighting is low, or if the receiver is not operating
normally you must replace the battery;
• Use adapted personal protection when dangerous live parts can be
accessed on the installation on which the appliance is used.
•
Before each use, check the good condition of the cable insulation and
units. All elements of which the insulation is deteriorated (even
must be put out of service for repair or disposed of as waste.
12
English
partially)
CBF01