System Components UA-Lite Note: Each UniFi Access component and all third-party accessories are sold separately. Installation Requirements • Phillips screwdriver • Ethernet cable, CAT5e or better Sample Wiring Topology PoE IN UA-Hub Push Motion Push Siren Sensor Button Door Position...
Determine the installation locations for each UA-Hub and door access reader. Cable runs for Ethernet should not exceed 100 meters; wire runs for lock cables should not exceed 45 meters. Peripherals To PoE BT UA-Pro UA-Lite UVC-G3-FLEX Sample UniFi Access Diagram...
Página 4
Access Reader Run an Ethernet cable from the UA-Hub location to the install location of the access reader. Depending on your system setup, the access reader can be installed on either the inside or the outside of the door. UA-Lite 1.
Página 5
3. Pull the Ethernet cable from the wall and secure the mount to the wall using two screws. 4. Connect the Ethernet cable to the back of the UA-Lite and secure it to the mount. 5. Installation is complete.
Página 6
UID App Download and install the UID app to set up and configure your UniFi Access system. 1. Launch the UID app. 2. Follow the on-screen prompts to complete the installation.
Página 7
Specifications UA-Lite Dimensions 94.91 x 40.00 x 31.10 mm (3.74 x 1.57 x 1.22") Weight 65 g (2.29 oz) Mounting Options Wall mount Networking Interface 10/100 Mbps Ethernet Max. Power Consumption Power Method 802.3af PoE IP Rating IP 54 Buttons (1) Reset LEDs White / Blue...
There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician. Limited Warranty www.ui.com/support/warranty The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class...
Página 9
Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
Página 10
CAN ICES-3(B)/NMB-3(B) Pour réduire le risque d’interférence aux autres utilisateurs, le type d’antenne et son gain doivent être choisies de façon que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour une communication réussie. Cet appareil est conforme à la norme RSS Industrie Canada exempts de licence norme(s).
Página 11
RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.
Página 12
Français La directive européenne 2012/19/UE exige que l’équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages.
е в съответствие със съществените изисквания и други приложими разпоредби на Директиви 2014/53/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: www.ui.com/compliance Hrvatski [Croatian] Ubiquiti ovim putem izjavljuje da je ovaj uređaj UA-Lite sukladan osnovnim zahtjevima i ostalim bitnim odredbama Direktiva 2014/53/EU.
Página 14
Latviešu valoda [Latvian] Ar šo, Ubiquiti, deklarē, ka UA-Lite ierīce, ir saskaņā ar būtiskajām prasībām un citiem attiecīgiem noteikumiem Direktīvās 2014/53/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā interneta vietnē: www.ui.com/compliance Lietuvių kalba [Lithuanian] Ubiquiti deklaruoja, kad šis UA-Lite įrenginys atitinka esminius reikalavimus ir kitas 2014/53/ES Direktyvų...