Cleaning And Maintenance; Service Centre; Environmental Concerns - Concept RM7000 Manual De Instrucciones

EN
Grater
IMPORTANT
DO NOT attempt to use this function while grinding, blending or chopping.
1. Cut the food into pieces. Approximately to the size of 20 × 20 × 60 mm so as to be
easily inserted in the opening of the container. Inserted food should not contain
hard parts. Hard parts could cause the motor to stop. If the motor stops, stop the
appliance immediately and unplug it. Remove the entire grater assembly. If the
motor stops automatically, eliminate the cause of the stop. After the motor has
cooled down, it is possible to continue.
2. Switch the appliance on by pressing the speed control button (4) to the speed 5.
3. Place the food in the container exclusively using the stamper.
4. After grinding is completed, turn the speed control button (4) to the "OFF" position
and remove the plug from the wall outlet.
5. Maximum grating time is 5 min. in continuous operation.
Assembly instructions for grater
• Remove the front cover (Fig. 1).
• Place and turn the grater body counter-clockwise so that it clicks firmly into place
(Fig. 2).
• Place the grated food container under the grater.
• Insert the plug into the wall outlet.
• Set the speed control button to position 5. Then place the food in the container and
push it into the container with the stamper.
• After use, switch off the appliance and unplug it.
• Press the grater locking button (see Fig. 1). Turn the grater clockwise and remove the
entire grater assembly (Fig. 3).
• Place back the front cover.
1. Fine vegetable grater
2. Coarse vegetable grater
3. Vegetable slicer
1
60
Release
button
Fig. 1
Fig. 2
Fig. 3
2 3

CLEANING AND MAINTENANCE

• Unplug the power cord from the wall outlet before cleaning.
• Never immerse the base of the blender with a motor into the water!
• Do not use any sharp or abrasive cleaners.
• Only a damp cloth should be used to clean the outside of the cover.
Container and accessories
NOTICE
• The whisks and the container can be washed in the dishwasher.
• Other parts are not suitable for washing in a dishwasher.
• The parts that come into contact with food can be washed in soapy water.
• Before reassembling, let all the parts dry thoroughly.
• After drying, apply a small amount of vegetable oil to the surface of the container and the replaceable adapters of
the grinder.

SERVICE CENTRE

Extensive maintenance or repair, which requires access to internal parts of the product, has to be performed by
a qualified service centre.

ENVIRONMENTAL CONCERNS

• Packaging materials and old appliances should be recycled.
• Packaging materials may be disposed of as sorted waste.
• Dispose the plastic bags made of polyethylene (PE) of as sorted waste.
Recycling of the appliance at the end of its lifespan
The symbol on the product or on its packaging indicates that this product may not be treated as
household waste. It is necessary to take it to a container park for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling of this
product, please contact your local council, your household waste disposal service or the shop where
you purchased the appliance.
The product meets all the necessary requirements of the EU directives applicable to the specific product.
Changes in text, design, and technical specifications are subject to change without notice and we reserve the right to
change them.
RM7000 RM7000
EN
61