Cooper Lighting Solutions Neo-Ray Instrucciones Para La Instalación página 3

1
Remote box
(c)
Electrical Cover
(a) Trim Cover
Remove Remote box from packaging and disassemble assembly: (a) Remove the trim cover
from the remote box housing. (b) Disconnect the ground strap's quick disconnect. (c) Next
remove the screws attaching the electrical cover to the remote box housing. Set hardware
aside in a safe place.
2
50.000
[1270.00]
[660.40]
Cut rough opening in sheet rock for remote box install. See dimensions above.
3
Remove knockout for threaded rod.
3
COOPER LIGHTING SOLUTIONS
(b)
Ground Strap
4.000
[101.60]
26.000 4.000
[101.60]
Remove knockout for
threaded rod
Installation instructions
IL524010EN
(c)
(b)
Quick Disconnect
4 ft box
2 ft box
4
Remove access plate. Secure shielded cable to access plate.
Reinstall access plate pulling wiring through housing. Connect wire
feed to driver enclosure per wiring scheme on specification sheet.
(a)
Whip
Attach power and
dimming wires using
wire nuts (provided by
others)
Universal
Plate