Alcochem Hygiene H-trap Manual De Instrucciones página 3

A. Read this manual carefully before taking any action:
Congratulations with the purchase of this high quality horse fly trap. Before using this model we
would like to ask you to read this manual carefully. If you have questions afterwards feel free to
contact your local supplier.
The information in this manual is based upon the latest information, and is provided subject to
alterations. We reserve the right to change the construction and/or configuration of the product
at any time without obligation to modify earlier versions of the product. Store this manual
carefully for future use.
B. Receipt of unit:
While unpacking, check for any signs of shipment damage. If found, notify both your transporter
and supplier in writing, within 8 days after receipt, with full details of the damage that has
occurred. Retain the equipment and packing materials for inspection. Check that all parts have
been received as ordered. Make sure that all packaging is removed from the unit before use.
C. Installation of the H-trap:
The H-trap needs to be installed in the direct vicinity of the resting and/or feeding places of the
animals, in the ground or against a wall or pole. Horses are especially curious animals and may
want to nibble at the plastic hood. This needs to be avoided . If required, protect the H-trap to
avoid this from happening.
The numbers in the text below refer to the numbers used in the exploded view drawings,
figures 1 to 3, which are placed at the back of this manual.
D. Required mounting materials:
• Hammer (not in scope of supply)
• Adjustable wrench (not in scope of supply)
• Pump (enclosed)
E. Installation: see figure 1 Exploded view
1. Mark the spot in the ground where you want to place the unit.
2. Once the base pipe (1) is firmly placed onto the ground use a hammer to drive the pipe into
the ground, till the anti-rotation anchor is completely under the soil. If the ground is very hard
you can use a ground drill. (not included in scope of supply)
3. Mount the middle pipe (2) onto the base pipe (1) using the long bolt (4) the nut for long bolt
(5) with the washer (6) in-between. (The bolt goes through the pipe and then the washer with
the nut has to be placed onto this.)
4. Mount the top pipe (3) onto the middle pipe (2) using the long bolt (4) the nut for long bolt (5)
with the washer (6) in-between.
5. Mount the bracket (7) on the top into the top pipe (3) using the long bolt (4) the nut for long
bolt (5) with the washer (6) in-between.
6. Make sure that the bracket (7) and stabilising ring (8) are firmly connected with
the two M8 (17) bolts.
All rights reserved. No part of this document may be reproduced, stored in a database or any other retrieval system, or published, in
any form or in any way, electronically, mechanically, digitally per photo print or microfilm or any other way without written permission from
the writer. © 2017 Copyright Alcochem, The Netherlands Service manual H-trap / April 2014 / H-trap English version 1.9
Service manual H-trap / English version 2.1
All right reserved. No part of this document may be reproduced, stored in a database or any other retrieval system, or published, in any form
or in any way, electronically, mechanically, digitally per photo print or microfilm or any other way without written permission from the writer.
© 2014 Copyright Alcochem, The Netherlands
page: 2 / 4
3