Idiomas disponibles
Idiomas disponibles
CEILING SPEAKER
Install Process
Disassembly Process
- Put the ceiling speaker in the installation location.
- The allowed thickness of the ceiling must be between
10 to 25mm.
- Make the mounting hole according to speaker data (see table).
- Use the thin end of the L shape wrench to install the speaker; use
the thin end of the L shape wrench to push upward the mounting
tabs (legs) and rotate 180º clockwise, then the speaker will be
fixed on the installation location
- The mounting tabs are locked
- Use the hexagon end of the L shape wrench and turn it
counterclockwise and the tab (legs) .
- Turn the wrench conterclockwise until the mounting tabs
are unlocked with a click.
- The mounting tabs (legs) will be opened and the speaker will
be detached.
- The speaker could be removed from the installation location.
NOTE: The L shape wrench and grille tool are
included on each device package.
User Manual
- 2 -
IC 550T/660T/880T
