Tabla de contenido
Idiomas disponibles
Idiomas disponibles
- with a thin object, remove the black aesthetics of the controls.
- remove the two screws where the aesthetics were first and the one at the bottom under the technical label.
- separate the plastics of the body, remove the screw of the electrical circuit, disconnect and remove the
battery
Whatever the type of exhausted battery, it must not be thrown in the household waste, in the fire or in the
water. Each type of exhausted battery must be recycled or disposed of in the appropriate dedicated collection
centers.
MAINTENANCE AND CLEANING
Disconnect the clipper from the power adaptor, and unplug it from the power outlet before
starting any cleaning operations.
After each cut, always clean used comb (7) and cutting blade (1) by blowing over them or using the small
brush (9). Periodically lubricate the blade by following the steps below.
Open the flap placed beneath the cutting blade, pushing the blade as shown in figure below. Remove
remaining hair by blowing or using the small brush (9).
Use lubricating oil (10) for the blade. 2 or 3 drops are enough if this operation is carried out frequently.
As shown in the figure, two points must be lubricated with oil:
Put 1-2 drops on the blade and 1-2 drops on the
driveshaft joint.
Use only the provided oil or similar oil without
acids.
Replace the cover by following the next steps:
-
Insert the lateral tab of the cover in the
joints of the housing.
-
Push the door towards the clipper body
until it clicks in position.
Clean the main body by using a soft damp cloth, never immerse the unit in water or
other liquids.
TECHNICAL FEATURES
•
Power supply: IN - AC 100-240V, 50/60Hz, OUT DC 3.6V – 1000mA
•
Charging light
•
Cutting height adjustment
•
Ni-Mh battery, 2x600mAh
•
Accessories: 2 combs, AC/DC adaptor, lubricating oil, small brush, shissors, comb
TECHNICAL SHEET POWER SUPPLY RY036100EU
Information
Input voltage
Input AC frequency
Output voltage
Output current
Output power
Average active efficiency
No-load power consumption
Value
115
230
60
50
3.6 d.C.
1.0
3.6
71.86
72.95
0.03
0.04
Unit
V
Hz
V
A
W
%
W
12
Tabla de contenido
