Mem Read Function; Maintenance; Changing The Battery(S) - PANCONTROL PAN Luxmeter Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56

MEM READ function

Press the button MEM READ more than 1 seconds to store the current
measured value. You can store up to 99 measurements.
Press to read the measured values, MEM READ again for more than 1
sec., until R MEM 01 is displayed. With the up / down keys you can now
the values 01... 99 read out.
To deactivate this function, press MEM READ again longer than 1 sec.
To delete the stored data press MEM READ and the on/off switch at the
same time, until CLR is in the display.

8. Maintenance

Only authorized service technicians may repair the instrument.
Note:
If the instrument is malfunctioning, please test:
- Battery condition and polarity
- Condition of the fuse(s) if available.
- Condition of the test leads.

Changing the battery(s)

Replace the battery(s) when the battery symbol or BATT is displayed
on the LCD.
Remove test leads from any power source and turn the device OFF
before opening the cover!
Remove the protective cover and the screws of the battery or fuse
compartment using a proper screwdriver and remove the lid.
Replace the battery. Mind the correct polarity.
EN 11
Tabla de contenido
loading

Tabla de contenido