Safety Switch - DAY Useful Everyday 72201 Manual De Instrucciones

Tips
Always place the deep fryer on a stable
surface and keep all � ammable materials
away.
Make sure that the deep fryer is not near or
on a switched-on hot plate.
Before you use the deep fryer it must be � lled
with the required amount of oil or fat.
Never use the deep fryer without oil or fat
because this could damage the unit.
Never move the deep fryer during use.
The oil becomes very hot and you can get
burned. Wait to move the deep fryer until the
oil has cooled off .
This deep fryer is protected with a thermal
safety device, which switches the appliance
off automatically if it overheats.
Never immerse the unit in water.
Never leave the deep fryer unattended
while it is in use. Always ensure the safety of
children if they are near the deep fryer. If the
deep fryer and/or cord are damaged, they
must be repaired by a professional service
department.
Do not try to repair the unit or replace a
damaged cord yourself. This requires special
tools.
Be sure not to damage the heating element.
(Do not bend or dent.)
The electrical component is equipped with a
safety cut-off , which ensures that the heating
element can only function when the element
is correctly placed on the fryer.
Safety thermal cut-out
In the event of overheating, the thermal cut-
out will switch off the deep fryer.
This can happen if the deep fryer is not � lled
with suffi cient oil or solid frying fat is melted
in the deep fryer. If solid fat is melted in the
deep fryer, the heating element is unable to
radiate the produced heat quickly enough.
If the safety thermal cut-out switches off the
deep fryer, proceed as follows:
Allow the oil or fat to cool down.
Carefully push in the reset switch at the
rear of the control element with a small
screwdriver.
The deep fat fryer is now ready to use again.

Safety switch

The safety switch in the control element
ensures that the heating element can only be
switched on when the control element locks
with a click.
GB
29