Instruction Manual; Preparation For Operation - GRAPHITE 58G200 Manual Del Usuario

Descriptions of used pictograms.
1 2
1. Read the instruction manual
2. Disconnect before repairing (maintenance)
3. For indoor use
4. Keep out of reach of children.
5. Protect against rain
6. Do not cover
7. Watch out! Hot element
CONSTRUCTION AND USE
The electric heater is used to heat the air in confined areas. Electric heaters release heat warming up the
air blown by the fan. Two heating levels, cold air supply mode and an adjustable thermostat provide a
wide range of applications in garages, warehouses, workshops and on construction sites. It is intended for
indoor use, only in an upright position.
Do not use the appliance contrary to its intended purpose.
DESCRIPTION OF GRAPHIC PAGES
The following figures refer to the parts of the appliance shown in the graphic pages of these instructions.
1. Heating level switch
2. Front panel
3. Heaters
4. Handle
5. Thermostat
6. Casing
7. Base
8. Motor with fan
9. Back panel
* There may be differences between the drawing and the product.
DESCRIPTION OF GRAPHIC SIGNS USED
CAUTION
WARNING
INSTALLATION/SETUP
INFORMATION
The appliance can be used to heat the air in confined areas.
The appliance can only be used placed on the ground and fully assembled. It is forbidden to use the
appliance on an unstable surface.
● Place the heater in upright position on a flat, stable surface in a safe distance from flammable objects.
●
Connect the power supply to the heater.
On the first start-up or after a long break in service, a characteristic smell may occur for a short time. This
is normal.
3 4

PREPARATION FOR OPERATION

11
5 6 7