Manual Operation; Care, Maintenance, Storage And Transport; Troubleshooting; Specifications - ClickTronic 60808 Manual Del Usuario

the product into standby mode.
2. Use the number buttons to switch between
sources.
3. Use the "CEC" button of the remote control to
enable or disable the CEC function of the Full
HD switch.

Manual operation:

1. Press the Power/SELECT button for approx. 2
seconds to set it into standby mode.
2. Press the Power/SELECT button for several
short times until the preferred chanel appears.
The product uses the following switching
order:
Source 1
3D video format:
Frame packing:
1920 x [email protected]/24 Hz
1280 x [email protected]/60 Hz
1280 x 720p@50 Hz
Side-by-Side (Half):
1920 x [email protected]/60 Hz
1920 x 1080i@50 Hz
Top-and-Bottom:
1920 x [email protected]/24 Hz
1280 x [email protected]/60 Hz
1280 x 720p@50 Hz
3D application:
1. Ensure all devices (HDTVs, Receivers, cables,
Blu-Ray Players, etc.) support the same 3D
TM
formats.
2. If a device supports no 3D, on all devices 2D
will be displayed.
6 Care, Maintenance, Storage and
Transport:
DANGER! Risk of life by electric shock!
Avoid contacting mains voltages!
ATTENTION! Risk injury by short-circuit!
Never bridge contacts!
Do not put things into ventilation slots or ports!
• The device is maintenance-free.
• Always disconnect the mains plug from mains
when not in use!
• Use a dry and soft cloth to clean your product.
Be careful to avoid scratches. Use a slightly
14
60808_2012_(HC441)_V1_14lng.indd 14-15
Source 2 Source 3 Source 4
Clicktronic®
moist cloth for heavy stains. Look out for live
cables! Do not use any cleaning supplies. This
can cause burns to the materials. Avoid liquid
entry to the device.
• Avoid places with high temperatures, humidi-
ty, or places which can become wet, also du-
ring maintenance, care, storage, and trans-
port.
• Keep the product away from children and
store it at dry and dust-proof places!
• Keep the original packing for transport and to
avoid damages.

7 Troubleshooting:

Problem Action
No picture • Make sure, the connection of
source devices and TV firstly works
without the product.
• Check all connectors and cables for
damages. Make sure, the device is
switched on.
Pictures • Mind conclusive connections of the
without cables.
tone • Check, if the used cable only can
transmit pictures like DVI cables. By
using a DVI to HDMI
only pictures transmitted, too.
• If you connect the output devices
with a source device, HDCP will lock
the audio track or the complete
function.
HDCP does • Switch the Full HD splitter off and
not work on for one time.
Resolusion • Make sure that source device and
does not output devices support 1080p.
reach 1080p • Also check the used HDMI
for supporting 1080p.

8 Specifications:

Model 60808
Operating voltage 230 V AC / 50 Hz (5 V DC)
Outputs 1 pc. HDMI
Weight & Measure-
830 g, 220 x 29 x 70 mm
ments
Inputs 4 pcs. HDMI
Pulse frequency up to 225 MHz
Resolution / color
up to 1080p Full HD / 12-Bit
depth
Housing Metal
Clicktronic®
TM adaptor are
TM cables
TM socket
TM sockets
15
12.01.2012 14:02:24