Set Alarm; Activate Alarm; Temperature; Select Channel Number - Oregon Scientific RAR621 Manual Del Usuario

SET ALARM

1. Press to display the type of Alarm you wish to
set: Weekday or Single.
2. Press and hold again for 2 seconds. The Alarm
settings will blink.
3. Select the hour and minute. Press
settings. Press To confirm.

ACTIVATE ALARM

Press or to activate or deactivate the Alarm. "-:--"
indicates that the alarm is deactivated.
STOP ALARM
To stop the alarm from ringing, Press

TEMPERATURE

This product can display current, minimum, and
maximum temperature information collected by the
remote sensors and main (indoor) unit.
Outdoor data is collected and displayed every
78 seconds. Indoor data is collected and displayed every
10 seconds.

SELECT CHANNEL NUMBER

Press CHANNEL to switch between sensors 1-3.
The icon shows the selected sensor.
Kinetic-
wave icon
Designat-
or to change
ed
Display
To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL or MEM.
11
Indoor Remote Remote
Display Display Display
Channel 1 Channel 2
.
Remote
Display
Channel 3