Jasco my TOUCH SMART Manual De Instrucciones

In-Wall
Motion-Sensing
Switch
ON/OFF override
Motion always
activates device
Motion activates
device in low light only
Sensitivity options:
•
15ft. range
••
25ft. range
•••
30ft. range
For indoor use only. The motion-sensing switch detects
movement to operate permanently installed lights. Light-
sensing technology and motion-sensitivity settings allow
variable control to accommodate any room.
Detection zone
The motion sensor covers a 150° range up
to 30ft. For ideal coverage range, avoid
installing sensor in areas obstucted by
furniture, plants, windows and other large
objects.
Operation
The sensor operates in occupancy or vacancy mode. Both
settings automatically turn off lights 1-30 minutes after
movement stops based on the selected timer option.
Occupancy mode turns on lights automatically when motion
is detected. Lights must be turned on manually when vacancy
is activated.
Manual ON/OFF
The ON/OFF button provides temporary control of lights
regardless of operation mode. The button can also be pressed
by pushing the door.
Occupancy mode
To automatically turn ON/OFF lights, select an occupancy
mode. Pressing "motion on always" activates the occupancy
setting and monitors movement at all times. "Motion on dark"
disables the motion sensor in daylight and automatically
enables the sensor in low-light situations.
Vacancy mode
Push the "vacancy auto off" button to activate vacancy mode.
Lights must be manually turned on using the ON/OFF button
or door. Select a timeout duration by pressing the 1-, 5- or
30-minute button. When motion isn't detected for the set
time, lights automatically turn off.
In either mode, the connected light turns off automatically
after the desired period. Select the 1-, 5- or 30-minute option
to set the duration lights remain on after motion is no longer
detected.
41381 MANUAL V1
04/08/20
MADE IN CHINA
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd.,
Oklahoma City, OK 73114.
This Jasco product comes with a 1-year limited warranty.
Visit www.byjasco.com for warranty details product registration.
Questions? Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM—8PM, M-F, Central Time.
Motion sensitivity
Vacancy —
Low (15ft.), medium (25ft.) and high (30ft.) motion-sensitivity
Manual ON/Auto OFF
settings accommodate various room sizes and prevent false
activation of the lights by pets or other small sources of
1 minute — Auto OFF
movement. Press the motion-sensitivity button to select the
5 minute — Auto OFF
desired setting. The LEDs on the button indicate the sensitivity
level. One illuminated LED indicates low is selected. Two
30 minute — Auto OFF
and three illuminated indicators represent medium and high
sensitivity, respectively.
Continuous runtime
Press the ON/OFF button or sensor door for three seconds to
disable the motion sensor and turn on the light continuously.
Push the manual ON/OFF button again to turn off the light —
sensor returns to previous settings.
15ft. 15ft. Replace the door
A light-almond replacement door is included. Insert a flat-
blade screwdriver into either groove in the lower corner of the
30ft.
sensor and gently pry up the door. Repeat on the opposite side
to remove the door from the sensor. Align the hooks of the
replacement door with the hooks at the top of the sensor and
150°
snap the bottom tabs into place.
Troubleshooting
Ensure line, load, neutral and ground connections are secure if
the sensor is not functioning properly.
Light does not turn OFF
•
•
Light turns ON when not desired
•
Specifications
120VAC 50/60Hz
15A resistive
1200W tungsten
5A/600W electronic ballast/LED
1/2HP motor
Determine which timeout setting is selected.
Remove heat sources within 6ft. of the sensor, like high-
wattage lights, portable heaters or HVAC devices.
Press the motion-sensitivity button to select a less-sensitive
setting.
READ IT OR WATCH IT
Read instructions or watch easy-to-follow video.
Scan QR code or visit https://byjasco.com/41381i
WARNING
RISK OF ELECTRIC SHOCK
• SHUT OFF POWER AT FUSE BOX OR
CIRCUIT BREAKER BEFORE INSTALLATION
• DO NOT USE IN WET LOCATIONS
• USE INDOORS ONLY
RISK OF FIRE
• DO NOT USE TO CONTROL APPLIANCES
THAT CONTAIN HEATING ELEMENTS
(COOKING APPLIANCES, HEATERS, IRONS,
ETC.)
• DO NOT EXCEED ELECTRICAL RATINGS
• USE COPPER WIRE ONLY WITH THIS
DEVICE
• DO NOT USE TO CONTROL RECEPTACLES