Bearing inspection
Table 7: Measurement table
Customer:
ThyssenKrupp Rothe Erde
drawing no.:
Date
Operating hours
Measuring point
Basic mea-
surement
Main load area
1
180° opposite
Main load area
2
180° opposite
Main load area
3
180° opposite
Main load area
4
180° opposite
1
Grease sample no.
2
Fe particles ppm/
3
PQ index
4
5
Grease
Lubrication system
Quantity/interval
Comments
The measurement values, analysis values
and bearing-specific information should be
entered in a separate table (see table 7) and
forwarded to ThyssenKrupp Rothe Erde.
ThyssenKrupp Rothe Erde GmbH
Service
Beckumer Strasse 87
59555 Lippstadt
Germany
ThyssenKrupp Rothe Erde sends the grease
samples to an approved, qualified laboratory.
Advantage
Short processing time and
notification by e-mail about the analysis
results and wear measurement.
Application:
ThyssenKrupp Rothe Erde
order no.:
0
Repeated measurement (12 months interval)
1
2
For the grease sampling set please
contact the following address:
ThyssenKrupp Rothe Erde GmbH
Tremoniastrasse 5–11
44137 Dortmund
Germany
Telephone +49 (2 31) 1 86 - 0
Telefax +49 (2 31) 1 86 - 25 00
Disposal at end of useful life
Bearing to be dismantled. Grease, seals and plastic
parts to be disposed of in accordance with waste guide-
lines. Bearing rings and rolling elements to be taken to
the relevant material recycling points.
Location:
Year of manufacture:
3
4
5
ATTENTION
Disposal may involve environmental
risks
• Follow the directives for waste disposal
• Mind the national laws
®
6
7
19
English