External Control; Changing The Battery - Bohle TwinLED Verifix BO 5500355 Manual De Instrucciones

15 Positioning the Lamp
The size of the cone of light is adjusted via the
distance to the bond. Light performance reduces
with increasing distance, which also increases
curing times
* measured with the UVA measuring device BO 5500300
16
ca. Ø 7 cm
(approx. Ø 2-3/4")
ca. Ø 9,5 cm
(approx. Ø 3-3/4")
ca. Ø 12 cm
(approx. Ø 4-3/8")
365nm
395nm
Distance [cm]
16 External Control
TwinLED is equipped with an external control
connection, e.g. for semi-automated processes.
Do not hesitate to contact us if you are interested.
17 Changing the Battery
A new battery is available with the art. no.
SP BT5559.
Loosen the four Phillips screws and lift the cover.
Remove the battery from the device and insert a
new battery.
When putting back the cover, make sure the gasket
is in the correct position. Then screw-fix the cover
with the four Phillips screws.
Please correctly dispose of used batteries.
Please also take into consideration the notes in
the "Disposal" paragraph of these operating
instructions.