Caberg RIVIERA V4 Manual Del Usuario página 6

ENG
1. HOW TO REMOVE THE CLEAR VISOR
1.1 Move backwards the two side covers on the visor
mechanism. (Pic.1)
1.2 Loosen both screws (one at a time) by ¼ turn WARNING: on
the right side (as wearing the helmet) the screw must be
loosen clockwise, while the left one counterclockwise. (Pic. 2)
1.3 Release the visor.
1.4 To reinstall the visor, follow the above steps in reverse.
2. HOW TO REMOVE THE INTERNAL SUN VISOR
2.1 Drive forward the cursor lever on top to move the sun
visor. (Pic. 3)
2.2 Release the sun visor by lifting the slider that fix it to the
lever with a flathead screwdriver. (Pic.4)
2.3 Remove the sun visor by pulling gently outwards. (Pic. 5)
3. HOW TO INSTALL THE INTERNAL SUN VISOR
3.1 Clip the sun visor accommodating its lateral sides into their
seating by slightly pressing. (Pic.6)
3.2 Drive forward the top cursor lever. (Pic.3)
3.3 Drive inside the sun visor till to fix it to its seating. ( Pic.7)
WARINING! Never use the sun visor at nighttime or with scarce
visibility condition.
WARINING! Any adjustment operation to the sun visor must be
done with the two-wheeler in still position.
4