Troubleshooting; Products Sold Separately; Ratings And Specifications - SENSAI EH-ZKF02 Manual Del Usuario

0702̲説明書̲P20̲P21

Troubleshooting

Please check the following and take the appropriate steps
Problem Possible Causes
• VEIL POTION Cover is not
Device
closed properly
doesn't
run • VEIL POTION is not
correctly inserted
(Lamp
doesn't
• Dead or low batteries
light up)
• Batteries are inserted backwards
• The VEIL POTION nozzle is
not sufficiently pressed down
• VEIL POTION is not
correctly inserted
No liquid
comes • Hardened liquid is stuck inside
the VEIL POTION nozzle
out when
(After having not used the
passing
device for a few days)
liquid
• VEIL POTION is empty
• Dead or low batteries
• Batteries are inserted backwards
• Too little liquid is left inside
VEIL POTION
Liquid is
released
• Dead or low batteries
but veil
• Condensation due to
does not
temperature difference
spray
• Device turns off because
it's too close to skin
• Insufficient liquid coming
from VEIL POTION
• Liquid is stuck in nozzle tip
• Device wasn't used for a
Volume of
long period
spray
• Device cap wasn't
decreases
closed properly
• Too little liquid is left inside
VEIL POTION
• Dead or low batteries
20
Steps to Take
• Make sure you hear a click when re-closing
the VEIL POTION Cover.
• Remove and reinsert the VEIL POTION.
• Replace with new batteries.
• Check battery poles and reinsert.
• While referring to "Preparation Before Using the VEIL DIFFUSER" (p. 07),
remove the VEIL POTION, press the nozzle down again, and reinsert.
• Remove and reinsert the VEIL POTION.
• Use the included nozzle stick to clean the tip of the nozzle and
ensure any blockages are removed. (See "Use the nozzle stick"
on p. 17) If liquid still does not come out after following the
above steps, replace with a new VEIL POTION. When not using
the VEIL DIFFUSER, ensure device cap is closed. Use opened
VEIL POTION promptly.
• Replace with new VEIL POTION.
• Replace with new batteries.
• Check battery poles and reinsert.
• Replace with new VEIL POTION.
• Replace with new batteries.
• Place the device in a warm environment for one hour or longer,
then wipe the nozzle and device using a clean, dry tissue or cloth.
• Restart by re-pressing the main switch. Spray at a distance of
approx. 8 cm (the width of a fist) from your face.
• Pass liquid through again and check if liquid comes out of
the nozzle tip.
• Wipe the nozzle tip clean using a clean, dry tissue or cloth.
• Pass liquid through again sufficiently, then use promptly.
• Pass liquid through again sufficiently and ensure the device cap
clicks when re-closing. Replace with new VEIL POTION.
• Replace with new VEIL POTION.
• Replace with new batteries.
Problem Possible Causes
• Insufficient liquid coming from • Pass liquid through again and check if liquid comes out of
VEIL POTION
the nozzle tip.
Device
• Wipe the nozzle tip clean using a clean, dry tissue or cloth.
• Liquid is stuck in nozzle tip
doesn't
• Device wasn't used for a few days • Pass liquid through again sufficiently, then use promptly.
spray
straight
• Device cap wasn't closed • Pass liquid through again sufficiently and ensure the device
properly
cap clicks closed when re-closing.
• The device is too close to face,
• Refer to How to Use (p.11~15).
insufficient hand movement
Veil is
patchy
• VEIL POTION is not correctly
• Remove and reinsert the VEIL POTION.
and/or
inserted
cottony
• Use device in a room with low humidity,
• Humidity is high
like the living room or bedroom.

Products sold separately

SENSAI BIOMIMESIS VEIL POTION (9 mL)

Ratings and Specifications

Power supply method Dry cell batteries
Battery type
Two AAA alkaline batteries (LR03) (sold separately)
Weight
Approx. 230 g (including cover, not including batteries or stand)
Steps to Take
｜
SENSAI BIOMIMESIS VEIL EFFECTOR (40 mL)
｜
21