Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
CD PLAYER
CD Player
Playing a CD
This CD-player can play Audio Discs, CD-R and CD-
Rewritables. Do not try to play CD-ROM, CDi, VCD,
DVD or computer CD.
1 Adjust the source selector to CD.
- -
Display: shows
Briefly.
2 To open the CD door, lift the CD door at the edge
marked OPEN .
3 Insert a CD, CD-R or CD-RW with the printed side
Facing up and press the CD door gently close.
4 Press
on the set to start playback.
5 To pause playback press
. To resume, press
again.
6 To stop CD playback, press STOP .
Note: CD play will also stop when:
– you open the CD compartment;
– you select RADIO sound source;
– the CD has reached to the end.
Selecting a different track
During playback you can use
or
to select a
particular track.
•If you have selected a track number in the stop or
pause position, press
to start playback.
•Press
once briefly for the next track, or press
repeatedly until the desired track number appears
in the display.
•Press
once briefly to return to the beginning of
a current track.
•Press
more than once briefly for a previous
track.
Finding a passage within a track
1 Press and hold down
or
•The CD is played at high speed and low volume.
2 When you recognize the passage you want release
or
Normal playback resumes.
Different play modes: Repeat
repeat – plays the current track continuously
repeat all – plays the entire CD continuously
EN-6
All manuals and user guides at all-guides.com
Programming track numbers
You may store up to 32 tracks in the desired
sequence. If you like, store any track more than once.
1 In the STOP mode, press
or
for your desired
track.
2 When your chosen track number appears, press
PROG MODE once to store the track.
the display shows prog and prog brifely
followed by your selected track number.
3 Repeat steps 1 to 2 to select and store all desired
tracks in this way.
4 To play your program, press
Reviewing your set program
•In the STOP mode, press PROG MODE.
The display shows your stored track numbers
in sequence.
Erasing a program
You can erase the contents of the memory by:
– opening the CD door;
– selecting RADIO source;
– pressing
(twice during playback or in the stop
Position)
MAINTENANCE & SAFETY
Precautions & General Maintenance
•Place the set on a hard and flat surface so that the
system does not tilt.
•Do not expose the set, batteries or CDs to
humidity, rain, sand or excessive heat caused by
heating equipment or direct sunlight.
•Do not cover the set. Adequate ventilation with a
minimum gap of 6 inches between the ventilation
holes and surrounding surfaces is necessary to
prevent heat build-up.
•The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
•To clean the set, use a soft dry cloth. Do not use
any cleaning agents containing alcohol, ammonia,
benzene or abrasives as these may harm the
housing.
CD player and CD handling
•The lens of the CD player should never be touched!
•Sudden changes in the surrounding temperature can cause condensation to form and the lens of your CD player to
cloud over. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment
until the moisture evaporates.
•Always close the CD door to keep the CD compartment dust-free. To clean, dust the compartment with a soft dry cloth.
•To clean the CD, wipe in a straight line from the centre towards the edge using a soft, lint-free cloth. Do not use cleaning
agents as they may damage the disc.
•Never write on a CD or attach any stickers to it.
X
EN-7
Tabla de contenido
loading

Tabla de contenido