Remote Control; Using Bluetooth - Thonet & Vander HOCH BT Manual De Instrucciones

EN
TECHNICAL FEATURES
POWER OUTPUT: 70W RMS (35W + 35W)
FREQUENCY RESPONSE: 50Hz - 20kHz
DISTORTION: <0.1% - 1W
S/N: >65dB
SEPARATION: >40dB
ACOUSTIC BOX MATERIAL: Wooden box HDAA
ACOUSTIC BOX SIZE: 460 x 181 x 230 mm
DRIVER SIZE: 2 Woofer 5.25"
DRIVER MATERIAL: Aramid Fiber
IMPEDANCE/POWER: 10 Ω 30W
TWEETER SIZE: 1"
TWEETER MATERIAL: Silk
IMPEDANCE/POWER: 6 Ω 24W
ANTIMAGNETIC SHIELD
CONTROLS: Volume, treble, bass
REMOTE CONTROL: Wireless
INPUTS: Bluetooth 4.0 (transmission distance: More than 10 m)
- 3.5 / RCA stereo
ACCESSORIES
_ Double 3.5mm RCA stereo auxiliary
_ Transparent cable for connecting passive speaker
_ Power cable (IEC 60320 C7)
_ Power cable with tab IEC 60320 C7 - UK plug BS 1363
*Included in certain countries.-
STAND BY
The speaker will starts in stand-by mode. To turn it on press
INPUT/Standby button. The speaker will be ready to use. If you
want to put on stand-by hold down 3 seconds stand-by button.
USING BLUETOOTH®
Press INPUT/Standby button (side panel) or INPUT button
(remote control) to choose the input source. Press MODE/Pairing
(side panel) or pairing button (remote control) 2 seconds to put
the speaker on pairing mode. Find and connect "T&V name" from
18
SAME ELEGANCE, TOMORROW´S TECHNOLOGY