Step 3) Operation Mode Selection - Lamborghini Caloreclima CRM N Manual De Usuario

2.3 (Step 3) Operation mode selection

OFF mode selection
If planning to leave the house for a long period (also see Vacation Function), or just to turn the heating off, press the button , displaying the symbol . Heating is turned
off and activated only if the room temperature falls below 5°C: frost protection function. If equipped with storage, the boiler will not deliver domestic hot water; the instantaneous-type
boiler will deliver domestic hot water.
Summer mode selection
To turn heating off, but maintaining the delivery of domestic hot water, press the button , displaying the symbol . Heating is turned off and activated only if the room
temperature falls below 5°C: frost protection function. The boiler, of any type, will deliver domestic hot water.
Winter mode selection
To re-enable heating and return to the previously set operation mode, press the button again, displaying the symbol . The boiler, of any type, will deliver domestic hot water.
Automatic heating operation (in Winter mode)
Press the button , displaying the symbol . The Remote Control will work according to the automatic weekly program, displaying the 6 time bands. The band indicated by
an arrow will be active at that moment. If the display does not show an arrow, it means that the actual time is between 00:00 and the start of time band 1.
Set temperature level exclusion
During automatic operation the room temperature value can be temporarily changed by pressing the buttons / in 0.1°C increments. By keeping the button pressed
the temperature will change rapidly. The exclusion function, indicated on the display by the symbol blinking, will be canceled at the first time band change.
Manual heating operation (in Winter mode)
To use the Remote Control at a fixed room temperature level, press the button , displaying the symbol (the 6 time bands are not displayed). Then set the room temperature
value by pressing the buttons / in 0.1°C increments. By keeping the button pressed the temperature will change rapidly. Manual operation will be maintained until
another operation mode is selected.
EN
77
code 3541Z230 - Rev. 03 - 09/2021