Tabla de contenido
ATTENTION
SAFETY AND MAINTENANCE OF
STEEL CABLES
IMPORTANT
The cables are the worn items. It is
your responsibility to avoid the
unexpected rupture of the cables.
The inspection of the cables must
be performed daily
Inspect all of the cables in
particular the nylon coating on all
of the cables, and in the areas near
the attachments at each cable end.
REPLACE ANY DAMAGED OR
WORN CABLES IMMEDIATELY
Do not allow the equipment to be
used until any damaged or worn
cables have been replaced. By
using or allowing a machine to be
used with a suspected faulty cable
may result in severe injuries.
See guide for more information.
ATTENTION!
On the tower of each
piece of EDGE line
equipment, you will find
information relating to
the SAFETY AND
MAINTENANCE OF THE
STEEL CABLES.
Check the items cited
DAILY for user safety.
*The location of the stickers may vary
according to the model of equipment.
TABLE OF
MAINTENANCE
Check the functioning
and integrity of the
components. Check the
equipment in accordance
with the table.Replace all
of the components that are
damaged broken or worn
out immediately.
CABLES
Check the tension, finishing
and covering.
Check if the attachment nut
on the weights are tight.
UPHOLSTERY / SEAT
Clean and dry
For hygiene
STRUCTURE
Clean and dry,
polish and wax
WEIGHT GUIDE
Lubricate and clean
SEAT
Clean
ADJUST LOCK PIN
LOCK PIN FOR FEET
WARNING SIGN
HANDLES AND BEARINGS
For more information read the instruction
manual that comes with the product
8
INSTRUCTIONS
Maintenance Table
On the tower of each
piece of EDGE line
equipment, you will find
a MAINTENANCE TABLE
Maintenance Table
Check that all of the
components are in
working order. Follow
this table when
conducting checks.
Replace all damaged,
broken or worn out parts
*The location of the stickers may vary according
to the model of equipment.
Tabla de contenido
