Trouble Shooting - Jasco RM24940 Manual De Instrucciones

3. Press and release CODE
SEARCH. The INDICATOR
LIGHT will turn off.
4. Starting with 0 on the
keypad, press the number
buttons in order (0-9) until
the INDICATOR LIGHT
blinks.
5. The number which causes the INDICA­
TOR LIGHT to blink is the first digit of your
code.
6. Repeat Step 4 until you have retrieved
all three numbers in the code.

Trouble Shooting

PROBLEM
Red light not blinking
when you press any
key.
The remote does not
operate your video
devices.
Not performing com­
mands properly
Problems program­
ming a TV/VCR
Combo Unit
VCR not responding
SOLUTION
A) Replace the batter­
ies with 2 new AAA
alkaline batteries.
B) Check if batteries
are properly installed.
A) Try all the codes
listed for your brand.
your video devices.
B) Try the Code
Search method on
Page 12.
Start Code Search
over again to locate
properlythe proper
code for full compati­
bility
Try the VCR code for
your brand. Some
combo units, howev­
er, may require both a
TV and VCR code for
full operation.
As a safety feature on
your remote, you
must press the REC
button twice.
15
CODE
SEARCH
OFF
0 9
. . .