Bticino Polyx Memory Display Manual De Instrucciones página 46

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 91
PROBLEM
On pressing the Entrance panel Activation/Cycling key (
picture appears.
On pressing the OK key the menu does not switch on and the hand-
set gives a busy sound
When called the handset does not ring
At the entrance panel it is difficult to hear the caller
At the handset it is difficult to hear the caller
The answering machine does not activate
46
SOLUTION
) no
- the audio/video channel may be busy, wait for it to become free
(from 1 to 3 minutes) and try again.
- the audio/video channel is busy, wait for it to become free (from 1 to
3 minutes) and try again.
- check that the call has not been excluded (the call exclusion LED is
ON);
- check the configuration of the devices.
- talk at a maximum distance of 40 centimetres from the Polyx
Memory Display microphone;
- check the entrance panel settings with the installer and if necessary
reduce the microphone volume;
- you can communicate in PUSH TO TALK mode (see previous pages)
- check the volume setting on the Polyx Memory Display;
- make sure that there are no strong noise sources near the Polyx
Memory Display;
- you can communicate in PUSH TO TALK mode (see previous pages).
- The handset is set as SLAVE and the installer has enabled the
answering machine on another handset (activate the answering
machine on that handset).
2 Trouble shooting
Tabla de contenido
loading

Este manual también es adecuado para:

369411369421369511369521368415

Tabla de contenido