River ET Super Instrucciones Adicionales página 6

riversystems.it
ET Super
AIR VENTS
riversystems.it
Turn the knob to fully or partially open the shutter according to the incubation needs.
The "ET 12 Super" model has only one shutter.
riversystems.it
riversystems.it
ICONS - ERRORS - AUDIBLE ALARMS
The icons of the display.
ICON
riversystems.it
TEMP
riversystems.it
DAYS
riversystems.it
RH%
Icons and alarm messages indicating a malfunction:
riversystems.it
MESSAGE
Err
tH
riversystems.it
riversystems.it
Err
ntC
riversystems.it
riversystems.it
riversystems.it
The incubator is plugged to a socket.
The machine is working correctly. The icon indicates that the resistance is run-
ning and is heating up. It will stay on until the set temperature is reached, then
riversystems.it
it will start flashing intermittently.
It indicates the temperature is reached.
It shows the incubation day attained.
Programming Mode. Press the
P
Mode.
Function not active in this version or in your Country
ALARM
Yellow icon Incorrect temperature
blinking
+ audible alarm
Motor blocked
Heating element not working
riversystems.it
Yellow icon Internal
blinking alarm: the NTC sensor is faulty
+ audible alarm
riversystems.it
riversystems.it
MEANING
riversystems.it
MEANING
riversystems.it
temperature
riversystems.it
riversystems.it
6
riversystems.it
riversystems.it
riversystems.it
riversystems.it
key or the key to enter the Programming
.
SOLUTION / SUGGESTION
Make sure the lid is closed
properly. Unplug the incubator for
a few minutes. If the alarm persists
when you plug it again, contact the
service centre
Check that the engine is running. If
riversystems.it
not, contact the service centre
Contact the service centre
probe Contact the service centre
riversystems.it
riversystems.it
Copyright © 2018 River Systems - All rights reserved
riversystems.it
r
riversystems.it
r