Elite IW440 Manual De Usuario página 31

REMOVING MOTOR BRUSHES
Motor brushes are a normal wear item and will require replacing periodically depending upon the amount the
tool is used. The following information outlines the general procedure for removal of the worn brushes and insta-
llation of the new brushes.
WARNING: Make sure the impact wrench is unplugged from the power source.
Removing worn brushes
1. Remove 4 screws (1) from the motor end cap (2) using a #2 screwdriver (Fig. 6).
2. Carefully pry the motor end cap (2) o the motor housing (3) using a small slot screwdriver.
NOTE: Be careful not to damage the motor end cap or the motor housing to ensure easy re-assembly.
12
www.ELITETOOLS.co
Keep Working