Infra Red Remote Control; Manual Operation - ClickTronic Quad HD Matrix 4x2 Manual De Instrucciones

5.3.2 Infra Red Remote Control:

• There are separate ON/OFF
buttons for each output A and B
and 4 separate selector buttons
for the source device.
Output A:
• Use the ON/OFF button of output A for star-
ting transmitting the signals to output A. The
LED indication (Active A) at the front side of
the housing flashes on. By pushing this button
again, the switches to standby mode.
• Use the key buttons for choosing between the
source devices.
Output B:
• Use the ON/OFF button of output B for star-
ting transmitting signals to output B. The indi-
cation LED at the front side of the housing
(Active B) will flash on. By pushing this button
again, the Quad HD Matrix switches to standby
mode.
• Use the key buttons for choosing between the
source devices.
Resetting:
• Use the RESET button on the remote control to
set the Quad HD Matrix into initial condition.

5.3.3 Manual Operation:

• The outputs A and B have seperated selection
buttons for the source devices and
for switching the product ON and OFF.
Output A:
• The SELECT/POWER button is a multifunctio-
nal button.
• Activating: Push the SELECT/POWER button
for 2 seconds to switch off the Quad HD Matrix.
(standby mode).
• Push it again for 2 seconds to restart the pro-
duct.
• Selecting the source device: If you would like
to choose the input channel manually, push
the SELECT/POWER button again for 1 second.
A green LED will flash on to identify the active
channel
Output B:
• The SELECT/POWER button is a multifunctio-
nal button.
• Activating: Push the SELECT/POWER button
for 2 seconds to switch off the Quad HD Matrix.
(standby mode).
• Push it again for 2 seconds to restart the pro-
duct.
• Selecting the source device: If you would like
to choose the input channel manually, push
the SELECT/POWER button again for 1 second.
18 Clicktronic®