Safety Instructions - Rosenbauer SELECT FLOW Manual De Instrucciones

Rosenbauer – SELECT FLOW / PRO JET
Nozzles
SELECT FLOW / PRO JET
Please comply with the following instructions concerning safety and usage in order to
guarantee safe, efficient deployment over a long period of time.
This user information must be available to all users and maintenance personnel!

SAFETY INSTRUCTIONS

(applies to all models)
▪
Never exceed the specified max. working pressure! Doing so could result in serious
damage or could put persons at risk. Maximum working pressure: see datasheet for
the relevant branch pipe, or contact Rosenbauer.
▪
The supply lines must be filled slowly in order to ensure that pressure is built up in a
controlled manner.
▪
Open and close the nozzle slowly and in a controlled manner. Opening or closing it
too quickly could cause dangerous water hammer.
▪
When used, a nozzle creates a recoil force which is dependent on the pressure and
the water flow. Therefore please always open and close the shutoff slowly.
▪
Please ensure that the discharge pipe is secured sufficiently in order to prevent
uncontrolled hose/ pipe movements.
▪
Always ensure that the nozzle is pointing in a safe direction before opening the valve.
▪
Never use the nozzle as a tool - doing so could cause damage which would adversely
affect functionality and safety.
▪
The nozzle is only intended for use with normal water/ conventional foam
concentrate. The use of salt water is not recommended.
▪
The product is only intended for use by trained fire-fighters.
▪
The nozzle has been factory-adjusted to ensure optimum performance. Do not make
any adjustments. Doing so could have a negative effect on performance and safety.
▪
Check the nozzle for damage before and after each use Perform the checks listed
under Maintenance Instructions.
▪
The coupling must be firmly connected to the branch pipe.
▪
The nozzle must be closed before the line is filled with fire fighting water or if the
branch pipe is coupled to the hose.
12