Problem Solving - Bestron AAC9000 Manual Del Usuario

PROBLEM SOLVING

Problem Possible cause
The air- There is no electricity
conditioning is not
functioning The room temperature is
lower than the set cooling
temperature
In the cooling mode: the
room temperature is too low
or too high
In the dehumidifying mode:
the room temperature is too
low
The device is standing in
sunlight
Cooling is not Doors or windows are open
functioning
properly Central heating or other
sources of heat
The filter is dirty or clogged
The inlets or outlets are
blocked
The device makes The device is not placed on a
a lot of noise stable and flat surface
Compressor does The device is overheated
not function
Remote control The batteries are empty
does not work
The distance between device
and remote control is too big
The remote control is not
aimed at the device
Display indicates The outlet temperature
'E1' sensor does not function
properly
Display indicates The room temperature
'E2' sensor does not function
properly
Advised solution
Check whether the socket the device is connected
to, has electricity
Change the set cooling temperature
The device optimally functions at a room
temperature between 7°C and 35°C
The device optimally functions at a room
temperature of 17°C and higher
Move the device into the shade
Close open doors and windows
Turn off the heating
Clean the filter
Remove obstructions
Place the device on a stable and flat surface
Wait a couple of minutes until the temperature has
lowered and restart the device
Replace the batteries
Stand closer to the device
Aim the remote control at the device
Have the outlet temperature sensor checked by a
professional
Have the room temperature sensor and switches
checked by a professional
48
EN